Abstract: Modern wireless systems demand dynamic adaptability, high throughput, low latency, and rapid processing capabilities. However, conventional embedded platforms often struggle to meet these ...
PetaLinux [1] and Yocto [2] are both build tools for creating custom embedded Linux platforms. Recently, I got into a discussion with a colleague as to which to use for an embedded Linux project.
In this series of 23 YouTube videos [Rich] puts the AMD Zynq-7000 SoC through its paces by building a development board from the ground up to host it along with its peripherals. The Zynq is part FPGA ...
Hi Alex, thanks for sharing about the open source project corundum NIC project. We are evaluating the possibility for 5G fronthaul protocol. Below is the compilation errors that prompted while using ...
Abstract: Building and testing software for embedded systems can be challenging with an impact on delivery time, design reproducibility, and collaboration among project contributors. To accelerate ...
I use Vivado 2021.1 and PetaLinux2021.1 to build ZCU102 project as README.md. The generation process of bitstream and .xsa is ok, but when I exectute make -C ps/petalinux/ build-boot, the PetaLinux ...
Page 2: Xilinx Kria KV260 Vision AI Starter Kit: Let's Start Coding, Conclusions Machine learning is everywhere. It's an integral part of our smartphones and smart home appliances, running customer ...
Silicon vendors will usually focus on chip design, and provide an expensive evaluation kit to early customers, leaving the design of cost-optimized boards and system-on-modules to embedded systems ...
Some results have been hidden because they may be inaccessible to you
Show inaccessible results